| Peer-Reviewed

Studies on Synthesis and Electrochemical Properties of Lithium Ferrous Silicate Cathode Materials

Received: 15 December 2021    Accepted: 25 December 2021    Published: 23 March 2022
Views:       Downloads:
Abstract

The lithium ferrous silicate (Li2FeSiO4) has high theoretical capacity of 330 mAh/g, abundant raw material resources, stable working voltage, excellent thermal stability of Si-O bond, environmental protection and low cost, and has become one of the attractive cathode materials in high-energy lithium batteries. However, the conductivity of Li2FeSiO4 material itself is poor, and the ionic conductivity is low, so improving the conductivity and Li+ diffusion coefficient of the material has become the focus of research. In this paper, Li2FeSiO4 material was synthesized by the combination of sol-gel method and solid-state sintering method, and the nano-material and metal ion doping were realized by liquid-phase grinding method, which increased the specific surface area and conductivity of the material and increased the specific energy of the material. XRD, TGDSC, particle size analysis and electrochemical capacity test show that the specific capacity of the initial Li2FeSiO4 material synthesized in solid phase is 120 mAh/g, and the capacity of the nano-treated Li2FeSiO4 material reaches 140mah/g; The Li2Fe0.5Mn0.5SiO4 material obtained by Mn doping has a capacity of 160mah/g; The volume of Li2Fe0.5Mn0.45Ti0.05SiO4 synthesized by adding metal Ti is increased to 195mah/g; The electrical conductivity of Li2Fe0.5Mn0.5Si0.975V0.025O4+C synthesized by doping v and c can be significantly improved, and the discharge capacity can reach about 200mAh/g. In the liquid phase grinding of the mixture of ethanol and acetone, it was found that the tautomers of alcohol and ketone were in the dynamic equilibrium of ketone and enol, and acetone met positively charged metal ions to form stable metal salts, which improved the stability of the material.

Published in Advances in Materials (Volume 11, Issue 1)
DOI 10.11648/j.am.20221101.13
Page(s) 20-29
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Lithium Ferrous Silicate, Solid Phase Synthesis, Nanocrystallization, Liquid Phase Grinding, Ketoenolic Dynamic Equilibrium, Metal Ion Doping

References
[1] Z. Li, J. Huang, B. Y. Liaw, V. Metzler, J. Zhang, Journal of Power Sources 245 (2014) 168-182.
[2] Popovich A. A., Maximov M. Yu., Rumyantsev A. M., Novikov P. A. Russian Journal of Applied Chemistry, 2015, 88 (5), 898-899.
[3] Popovich, A. A., Maximov, M. Y., Novikov, P. A., Silin, A. O., Nazarov, D. V., Rumyantsev, A. M. Russian Journal of Applied Chemistry, 2016, 89 (4), 679-681.
[4] Wang, Q.-S., Popovich, A. A., Bao, Y.-Y, Novikov P. A., Zheng, L.-Y., Razumov N. G., Yang Z.-L., Silin A. O. Journal of Functional Materials, 2014, 45 (13), 13098-13101+13107.
[5] Popovich, A. A., Novikov, P. A., Silin, A. O., Razumov, N. G., Sheng, W. Q. Russian Journal of Applied Chemistry, 2014, 87 (9), 1268-1273.
[6] Konstantin Pushnitsa, Pavel Novikov, Anatoly Popovich, Qingsheng Wang. Advanced Materials Research, 2015, 1120-1121, 132-136. https://www.arb.ca.gov/msprog/bus/battery_cost.pdf
[7] Armand, M., & Tarascon, J.-M. (2008). Building better batteries. Nature, 451 (7179), 652–657.
[8] R. Murugan, V. Thangadurai, W. Weppner. Angewandte Chemie Int. Ed. Engl., 2007, 46, 7778-7781. Web source: https://www.mindat.org/min-1651.html
[9] H. M. Kasper, Inorg. Chem., 1969, 8 (4), 1000–1002.
[10] Y. Chen, E. Rangasamy, C. Liang, K. An Chemistry of Materials, 2015, 27 (16), 5491–5494.
[11] R. Murugan, V. Thangadurai, W. Weppner, Angewandte Chemie International Edition 2007, 46 (41), 7778-81.
[12] J. Awaka, A. Takashima, K. Kataoka, N. Kijima, Y. Idemoto, H. Hayakawa, J. Akimoto, Chemistry Letters, 2011, 40 (1), 60-62.
[13] J. Percival, P. R. Slater, Solid State Community 2007, 142, 355-357.
[14] M. P. O’Callaghan, A. S. Powell, J. J. Titman, G. Z. Chen, E. J. Cussen, Chem. Mater. 2008, 20, 2360.
[15] J. Percival, D. Apperley, P. R. Slater, Solid State Ionics 2008, 179, 1693.
[16] J. L. Allen, J. Wolfenstine, E. Rangasamy, J. Sakamoto, J. Power Sources 2012, 206, 315–319.
[17] S. Mukhopadhyay, T. Thompson, J. Sakamoto, A. Huq, J. Wolfenstine, J. L. Allen, N. Bernstein, D. A. Stewart, M. D. Johannes, Chem. Mater. 27 (2015) 3658–3665.
Cite This Article
  • APA Style

    Wang Qingsheng, Pavel Novikov, Anadoli Popovich, Yang Zhelong, Yu Yao, et al. (2022). Studies on Synthesis and Electrochemical Properties of Lithium Ferrous Silicate Cathode Materials. Advances in Materials, 11(1), 20-29. https://doi.org/10.11648/j.am.20221101.13

    Copy | Download

    ACS Style

    Wang Qingsheng; Pavel Novikov; Anadoli Popovich; Yang Zhelong; Yu Yao, et al. Studies on Synthesis and Electrochemical Properties of Lithium Ferrous Silicate Cathode Materials. Adv. Mater. 2022, 11(1), 20-29. doi: 10.11648/j.am.20221101.13

    Copy | Download

    AMA Style

    Wang Qingsheng, Pavel Novikov, Anadoli Popovich, Yang Zhelong, Yu Yao, et al. Studies on Synthesis and Electrochemical Properties of Lithium Ferrous Silicate Cathode Materials. Adv Mater. 2022;11(1):20-29. doi: 10.11648/j.am.20221101.13

    Copy | Download

  • @article{10.11648/j.am.20221101.13,
      author = {Wang Qingsheng and Pavel Novikov and Anadoli Popovich and Yang Zhelong and Yu Yao and Okonov Leonid},
      title = {Studies on Synthesis and Electrochemical Properties of Lithium Ferrous Silicate Cathode Materials},
      journal = {Advances in Materials},
      volume = {11},
      number = {1},
      pages = {20-29},
      doi = {10.11648/j.am.20221101.13},
      url = {https://doi.org/10.11648/j.am.20221101.13},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.am.20221101.13},
      abstract = {The lithium ferrous silicate (Li2FeSiO4) has high theoretical capacity of 330 mAh/g, abundant raw material resources, stable working voltage, excellent thermal stability of Si-O bond, environmental protection and low cost, and has become one of the attractive cathode materials in high-energy lithium batteries. However, the conductivity of Li2FeSiO4 material itself is poor, and the ionic conductivity is low, so improving the conductivity and Li+ diffusion coefficient of the material has become the focus of research. In this paper, Li2FeSiO4 material was synthesized by the combination of sol-gel method and solid-state sintering method, and the nano-material and metal ion doping were realized by liquid-phase grinding method, which increased the specific surface area and conductivity of the material and increased the specific energy of the material. XRD, TGDSC, particle size analysis and electrochemical capacity test show that the specific capacity of the initial Li2FeSiO4 material synthesized in solid phase is 120 mAh/g, and the capacity of the nano-treated Li2FeSiO4 material reaches 140mah/g; The Li2Fe0.5Mn0.5SiO4 material obtained by Mn doping has a capacity of 160mah/g; The volume of Li2Fe0.5Mn0.45Ti0.05SiO4 synthesized by adding metal Ti is increased to 195mah/g; The electrical conductivity of Li2Fe0.5Mn0.5Si0.975V0.025O4+C synthesized by doping v and c can be significantly improved, and the discharge capacity can reach about 200mAh/g. In the liquid phase grinding of the mixture of ethanol and acetone, it was found that the tautomers of alcohol and ketone were in the dynamic equilibrium of ketone and enol, and acetone met positively charged metal ions to form stable metal salts, which improved the stability of the material.},
     year = {2022}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Studies on Synthesis and Electrochemical Properties of Lithium Ferrous Silicate Cathode Materials
    AU  - Wang Qingsheng
    AU  - Pavel Novikov
    AU  - Anadoli Popovich
    AU  - Yang Zhelong
    AU  - Yu Yao
    AU  - Okonov Leonid
    Y1  - 2022/03/23
    PY  - 2022
    N1  - https://doi.org/10.11648/j.am.20221101.13
    DO  - 10.11648/j.am.20221101.13
    T2  - Advances in Materials
    JF  - Advances in Materials
    JO  - Advances in Materials
    SP  - 20
    EP  - 29
    PB  - Science Publishing Group
    SN  - 2327-252X
    UR  - https://doi.org/10.11648/j.am.20221101.13
    AB  - The lithium ferrous silicate (Li2FeSiO4) has high theoretical capacity of 330 mAh/g, abundant raw material resources, stable working voltage, excellent thermal stability of Si-O bond, environmental protection and low cost, and has become one of the attractive cathode materials in high-energy lithium batteries. However, the conductivity of Li2FeSiO4 material itself is poor, and the ionic conductivity is low, so improving the conductivity and Li+ diffusion coefficient of the material has become the focus of research. In this paper, Li2FeSiO4 material was synthesized by the combination of sol-gel method and solid-state sintering method, and the nano-material and metal ion doping were realized by liquid-phase grinding method, which increased the specific surface area and conductivity of the material and increased the specific energy of the material. XRD, TGDSC, particle size analysis and electrochemical capacity test show that the specific capacity of the initial Li2FeSiO4 material synthesized in solid phase is 120 mAh/g, and the capacity of the nano-treated Li2FeSiO4 material reaches 140mah/g; The Li2Fe0.5Mn0.5SiO4 material obtained by Mn doping has a capacity of 160mah/g; The volume of Li2Fe0.5Mn0.45Ti0.05SiO4 synthesized by adding metal Ti is increased to 195mah/g; The electrical conductivity of Li2Fe0.5Mn0.5Si0.975V0.025O4+C synthesized by doping v and c can be significantly improved, and the discharge capacity can reach about 200mAh/g. In the liquid phase grinding of the mixture of ethanol and acetone, it was found that the tautomers of alcohol and ketone were in the dynamic equilibrium of ketone and enol, and acetone met positively charged metal ions to form stable metal salts, which improved the stability of the material.
    VL  - 11
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Technology Department, Zhejiang Changxing Sino-Russian Institute of New Energy Materials Technology, Changxing, China

  • Technology Department, Zhejiang Changxing Sino-Russian Institute of New Energy Materials Technology, Changxing, China

  • Technology Department, Peter the Great Polytechnic University, St. Petersburg, Russia

  • Technology Department, Zhejiang Changxing Sino-Russian Institute of New Energy Materials Technology, Changxing, China

  • Technology Department, Zhejiang Changxing Sino-Russian Institute of New Energy Materials Technology, Changxing, China

  • Technology Department, Peter the Great Polytechnic University, St. Petersburg, Russia

  • Sections