Volume 5, Issue 6, December 2016, Page: 57-65
Finite Element Study on the Vibration of Functionally Graded Beam with Different Temperature Conditions
Kazem Reza Kashyzadeh, Young Researchers and Elite Club, Semnan Branch, Islamic Azad University, Semnan, Iran
Alireza Amiri Asfarjani, Department of Mechanical Engineering, Qom University, Qom, Iran
Received: Sep. 10, 2016;       Accepted: Oct. 27, 2016;       Published: Dec. 23, 2016
DOI: 10.11648/j.am.20160506.11      View  3456      Downloads  122
Abstract
Functional graded materials have been wide range of applications in the different industries such as automotive, machine, aerospace and etc. So, the vibration analysis under different conditions is very important. FGMs are made of a ceramic and a metal to protect against large temperature gradients. The main objective of this research is to study of the effect of temperature field on the natural frequencies of functional graded (FG) beams with different conditions. The finite element model has been simulated in ANSYS. It is assumed that the beam is made of ceramic and metal, and the effective material properties such as Young’s modulus, Poisson’s ratio and etc. are temperature-dependent and vary continuously through the thickness direction according to a power-law distribution. Natural frequencies have been obtained with different conditions in the environmental temperature. Thus, modal analysis has been performed for a FGM beam with C-C and C-F supports. The obtained results have been compared with other published papers. It has a good agreement. Then, the effect of temperature field and slenderness ratio have been studied on the frequency values of FG thick beams. It is found that the natural frequency of the system is reduced by temperature increasing under all support conditions. And it is reduced by decreasing zirconia material at every constant temperature.
Keywords
Natural Frequency, FGM Beam, Temperature Field, Slenderness Ratio, Finite Element Method
To cite this article
Kazem Reza Kashyzadeh, Alireza Amiri Asfarjani, Finite Element Study on the Vibration of Functionally Graded Beam with Different Temperature Conditions, Advances in Materials. Vol. 5, No. 6, 2016, pp. 57-65. doi: 10.11648/j.am.20160506.11
Copyright
Copyright © 2016 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Reference
[1]
Mahamood R. M, Akinlabi E. T, Shukla M, Pityana S, (2012), “Functionally graded material: An overview”, Proceedings of the World Congress on Engineering, London, U. K., Vol. 3.
[2]
EL-Wazery M. S, EL-Desouky A. R, (2015), “A review on Functionally Graded Ceramic-Metal Materials”, Mater. Environ. Sci., Vol. 6, Issue. 5.
[3]
Hasani sadi M, (2014), “Functionally graded materials and manufacturing methods”, Journal of Manufacturing Engineering, Vol. 45, (in Persian).
[4]
Cho J. R, Tinsley Oden J, (2000), “Functionally graded material: a parametric study on thermal stress characteristics using the Crank-Nicolson-Galerkin scheme”, Comput. Methods. Appl. Mech. Engrg. Vol. 188.
[5]
Wosko M, Paszkiewicz B, Piasecki T, Szyszka A, (2005), “Application and modeling of functionally graded materials for optoelectronic devices”, IEEE.
[6]
Kiani Y, Sadighi M, Jedari Salami S, Eslami M. R, (2013), “Low velocity impact response of thick FGM beams with general boundary conditions in thermal field”, Composite Structures, Vol. 104.
[7]
Zamani J, Etemadi E, Hosseini Safari K, Afaghi Khatibi A, (2014), “Modeling of High Velocity Impact in Sandwich Beams with FGM Core”, Series of Advanced Structured Materials Book, Vol. 35.
[8]
Mohammadi Y, Khalili S. M. R, Malekzadeh Fard K, (2016), “Low velocity impact analysis of sandwich plates with functionally graded face sheets”, Mechanics of Advanced Materials and Structures, Vol. 23, Issue. 4.
[9]
Safri S. N. R, Sultan M. T. H, Yidris N, Mustapha F, (2014), “Low Velocity and High Velocity Impact Test on Composite Materials-A Review”, International Journal of Engineering and Science, Vol. 3, Issue. 9.
[10]
Fu Y, Hu S, Mao Y, (2016), “Nonlinear low velocity impact analysis of functionally graded shallow spherical shells in thermal environments”, Journal of Thermoplastic Composite Materials.
[11]
Asemi K, Jedari Salami S, (2015), “A study on low velocity impact response of FGM rectangular plates with 3D elasticity based graded finite element modeling”, Journal of Theoretical and Applied Mechanics, Vol. 53, Issue. 4.
[12]
Shen H, Leung A, (2003), “Postbuckling of pressure loaded functionally graded cylindrical panels in thermal environments”, Journal of Engineering Mechanics, Vol. 129.
[13]
Shen H, (2004), “Thermal postbuckling behavior of functionally graded cylinder shells with temperature dependent properties”, International Journal of Solids and Structures, Vol. 41.
[14]
Shen H, Noda N, (2005), “Postbuckling of FGM cylindrical shells under combined axial and radial mechanical loads in thermal environments”, International Journal of Solids and Structures, Vol. 42.
[15]
Shariyat M, (2008), “Dynamic buckling of suddenly loaded imperfect hybrid FGM cylindrical shells with temperature dependent material properties under thermo-electro-mechanical loads”, International Journal of Mechanical Science, Vol. 50.
[16]
Hodges, Yang D, Yang Rutkowski M, (1981), “Free-vibration analysis of rotating beams by a variable order finite element method”, AIAA Journal, Vol. 19, Issue. 11.
[17]
Mei C, (2008), “Application of differential transformation technique to free vibration analysis of a centrifugally stiffened beam”, Computers & Structures, Vol. 86.
[18]
Mohanty S. C, Dash R. R, Rout T, (2013), “Free Vibration of a Functionally Graded Rotating Timoshenko Beam Using FEM”, Advances in Structural Engineering, Vol. 16.
[19]
Ebrahimi F, Mokhtari M, (2015), “Semi-analytical vibration characteristics of rotating Timoshenko beams made of functionally graded materials”, Latin American Journal of Solids and Structures, Vol. 12.
[20]
Kapuria S, Bhattacharyya M, Kumar A, (2008), “Bending and free Vibration response of layered functionally graded beams, a theoretical model and its experimental validation”, Composite Structures, Vol. 82, Issue. 3.
[21]
Li X. F, Kang Y. A, Wu J. X, (2013), “Exact frequency equations of free vibration of exponentially functionally graded beams”, Applied Acoustics, Vol. 74, Issue. 3.
[22]
Şimşek M, (2010), “Fundamental frequency analysis of functionally graded beams by using different higher-order beam theories”, Nuclear Engineering and Design, Vol. 240.
[23]
Pradhan K. K, Chakraverty S, (2013), “Free vibration of Euler and Timoshenko functionally graded beams by Ray-leigh–Ritz method”, Composites Part B: Engineering, Vol. 51.
[24]
Arjangpay A, Ansari R, Darvizah M, (2012), “Vibration analysis of a FGM cylindrical shell using MLPG method”, Modares Mechanical Engineering, Vol. 13, Issue. 3, (in Persian).
[25]
Shirong L, Liange F, (2014), “Free vibration of FGM Timoshenko beams with through width delamination”, Science China Physics, Mechanics & Astronomy, Vol. 57.
[26]
Akbas S. D, (2015), “Free vibration and bending of functionally graded beams resting on elastic foundation”, Research on Engineering Structures & Materials, Vol. 1.
[27]
Jafari A. A, Fathabadi M, (2012), “Forced vibration of FGM Timoshenko beam with piezoelectric layers carrying moving load”, Journal of Aerospace and Mechanic Engineering, Vol. 9, Issue. 2.
[28]
Farid M, Zahedinejad P, Malekzadeh P, (2010), “Three-dimensional temperature dependent free vibration analysis of functionally graded material curved panels resting on two-parameter elastic foundation using a hybrid semi-analytic, differential quadrature Method”, Materials & Design.
[29]
Alshorbagy A. E, (2013), “Temperature effects on the vibration characteristics of a functionally graded thick beam”, Ain Shams Engineering Journal, Vol. 4.
Browse journals by subject