Volume 7, Issue 3, September 2018, Page: 58-66
The Influence of Metal Surfaces on the Effect of Lubricants
Jürgen Rigo, Faculty of Materials Science and Technology, Slovak University of Technology in Bratislava, Trnava, Slovak Republic
Pavel Kovačócy, Faculty of Materials Science and Technology, Slovak University of Technology in Bratislava, Trnava, Slovak Republic
Joachim Schulz, Fuchs WISURA GmbH, Bremen, Germany
Katja Vlasov, Fuchs WISURA GmbH, Bremen, Germany
Received: Jun. 12, 2018;       Accepted: Jul. 6, 2018;       Published: Aug. 13, 2018
DOI: 10.11648/j.am.20180703.11      View  533      Downloads  59
Abstract
An important aspect of tribology and lubrication is the question of the relationships and the predictability of phenomena of the interaction of lubricants with metal surfaces. In recent years studies on interactions of antiwear additives and sulfur carriers have been presented. Significant differences in the interaction with different metal surfaces (C steel or stainless steel) could be observed. Recent studies have shown that a different, especially mechanical, pretreatment of metal surfaces (C-steel) can lead to very different results.
Keywords
Lubricants, Base Oil, Additives, Mechanical Testing, Tribological Test Rig, Brugger
To cite this article
Jürgen Rigo, Pavel Kovačócy, Joachim Schulz, Katja Vlasov, The Influence of Metal Surfaces on the Effect of Lubricants, Advances in Materials. Vol. 7, No. 3, 2018, pp. 58-66. doi: 10.11648/j.am.20180703.11
Copyright
Copyright © 2018 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Reference
[1]
M. Grebe, Tribometry—an underestimated science, in: Annual GfT-Meeting 2016, Göttingen (in German).
[2]
Rigo, J., Kovačócy, P.: “Comparative analysis of standardized test methods on common tribological test rigs” International Journal of Mechanical Engineering and Automation Volume 4, Number 4, 2017, pp. 130-137, October 25th, 2017.
[3]
Rigo, J., Kovačócy, P. “Tribological test rig results using standardized and diversified test methods”. 21st International Colloquium Tribology – Industrial and Automotive Lubrication, Esslingen. January 9 – 11th 2018.
[4]
Kaesche, H.: Die Korrosion der Metalle, 3. Auflage, Springer Berlin, Heidelberg, New York, London, Paris, Tokyo, Hong Kong, Barcelona 1990.
[5]
Lichtman, W. I., Rehbinder, P. A., Karpenko, G. W.: Der Einfluss grenzflächenaktiver Stoffe auf die Deformation von Metallen, Akademie-Verlag, Berlin 1964.
[6]
Klocke, F.; König, W.: Fertigungsverfahren Umformen, 5. Auflage, Springer Berlin Heidelberg New York 2006. (in German).
[7]
FVA Forschungsvorhaben 289, Abschlussbericht, Heft 595, 2000.
[8]
Stratmann, M., Hoffmann, K., Müller, J.: Die Bedeutung von Rostschichten für den Ablauf von Korrosionsreaktionen bei niedrig legierten Stählen, Werkstoffe und Korrosion 42, 1991.
[9]
Bhargava, G., Gouzman, I., Chun, C. M., Ramanarayanan, T. A., Bernasek, S. L.: Characterisation of the “native” surface thin film on pure polycrystalline iron: a high resolution XPS and TEM study, Applied Surface Science 253 (2007) 4322-4329.
[10]
www.geocities.com/neveyaakov/electro_science/pourbaix.html)
[11]
Forbes, E. S., Reid, A. J. D.: Liquid phase adsorption / reaction studies of organo-sulfur compounds and their load carrying mechanism, ASLE Trans. (16) 1, S. 50-60 1973.
[12]
Schulz, J.; Holweger, W.: Wechselwirkung von Additiven mit Metalloberflächen; expert Verlag – 2010; ISBN: 978-3-8169-2921-5.
[13]
J. Schulz, P. Feinle, A. Hirdt, J. Rigo, G. Pfeiffer, C. Seyfert. Possibilities of the development of forming products based on test machine values, in: Annual GfT- Meeting 2011, Göttingen. (in German).
[14]
Schulz, J., Decker, B., Rehbein, W., Feinle, P., Rigo, J.: Matrix-Effekte –Einfluss der Schmierstoffmatrix auf die Wechselwirkung von Additiven mit Metalloberflächen; Tribologie und Schmierungstechnik 2 / 2013.
[15]
Hohenäcker, D. 2016. Wechselwirkungen von Schwefel-trägern mit Metalloberflächen unter der Berücksichtigung von Matrixeffekten. Universität Bremen, Germany.
[16]
Hoffmann, T.; Drechsler, A., Lehmann, D.: Einflüsse der Oberflächenrauheit auf den Verschleißschutz von Schmier-stoffen; Tribologie und Schmierungstechnik 4 / 2016.
Browse journals by subject