254 Editor(s) found
Editorial Member
Abdelkader Kahouli
Institute Néel
Grenoble, Isère, France
Editorial Member
Afzal Khan
State Key Laboratory of Silicon Materials, School of Materials Science and Engineering, Zhejiang University
Hangzhou, Zhejiang, China
Editorial Member
Aihua Zhong
College of Physics and Energy, Shenzhen University
Shenzhen, Guangdong, China
Editorial Member
Ajay Bhardwaj
Department of Mechanical Engineering, College of Engineering and Technology Bambhori
Jalgaon, Maharashtra, India
Editorial Member
Ajeet Srivastava
Department of Physics, Lovely Professional University
Phagwara, Punjab, India
Editorial Member
Alessandra Toncelli
Department of Physics, University of Pisa
Pisa, Italy
Editorial Member
Amos Bardea
Faculty of Engineering, Holon Institute of Technology
Holon, Israel
Editorial Member
Ana Neves
Faculty of Engineering, University of Porto
Porto, Portugal
Editorial Member
Anand Vyas
Department of Mechanical Engineering, the Hong Kong Polytechnic University
Hung Hom, Kowloon, Hong Kong
Editorial Member
Anastasios Anastasiadis
Department of Civil Engineering, Aristotle University of Thessaloniki
Thessaloniki, Greece
Editorial Member
Andrzej Komorek
Faculty of Aviation, Polish Air Force Academy
Dęblin, Lubelskie, Poland
Editorial Member
Angsuman Sarkar
Department of Electronics and Communication Engineering, Kalyani Government Engineering College
Kalyani, West Bengal, India
Editorial Member
Anil Kumar
Department of Chemistry, Lovely Professional University
Phagwara, Punjab, India
Editorial Member
Anil Khairnar
Department of Electronics, North Maharashtra University
Jalgaon, Maharashtra, India
Editorial Member
Anshuman Srivastava
Mechanical Engineering Department, Shambhunath Institute of Engineering and Technology
Allahabad, Uttar Pradesh, India
Editorial Member
Anubhav Rawat
Laboratory for Conveying and Handling of Particulate Solids, Department of Mechanical Engineering, Ben Gurion University of the Negev
Beersheba, Beersheab, Israel
Editorial Member
Aritra Ghosh
Department of Renewable Energy, University of Exeter
Truro, Cornwall, UK
Editorial Member
Arvaidas Galdikas
Department of Physics, Kaunas University of Technology
Kaunas, Lithuania
Editorial Member
Ashish Ravalia
Department of Nanoscience and Advanced Materials, Saurashtra University
Rajkot, Gujarat, India
Editorial Member
Ashry Jusoh
Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang
Kuantan, Pahang, Malaysia
Editorial Member
Aymen Yangui
The University of Tokyo
Meguro-ku, Tokyo, Japan
Editorial Member
Babak Eslami
Department of Mechanical Engineering, Widener University
Chester, Pennsylvania, USA
Editorial Member
Baha Elzaki
School of Chemical Engineering, Nanjing University of Science and Technology
Nanjing, Jiangsu, China
Editorial Member
Bozena Tyliszczak
Department of Chemistry and Technology of Polymers, Cracow University of Technology
Krakow, Malopolska, Poland
Editorial Member
Burak Bal
Departmant of Mechanical Engineering, Abdullah Gul University
Kayseri, Kocasinan, Turkey
Editorial Member
César Leandro Londoño Calderón
Institute of Polymer Technology and Nanotechnology (ITPN)-UBA-CONICET
Ciudad Autónoma De Buenos Aires, Argentina
Editorial Member
Chadrasekhar Loka
Department of Advanced Materials Engineering, Kongju National University
Cheonan, Chungcheongnam-do, South Korea
Editorial Member
Department of Materials Science and Engineering, Georgia Institute of Technology
Atlanta, Georgia, USA
Editorial Member
Charalampos Drosos
Department of Chemistry, University College London
London, UK
Editorial Member
Chengpeng Wang
Institute of Seawater Desalination and Multipurpose Utilization,SOA (Tianjin)
Tianjin, China
Editorial Member
Congchun Zhang
Department of Micro-Nano Electronics, Shanghai Jiao Tong University
Shanghai, China
Editorial Member
Daniel Correa
Nanotechnology National Laboratory for Agriculture, Embrapa instrumentação
Sao Carlos, Sao Paulo, Brazil
Editorial Member
Debashis Puhan
Department of Mechanical Engineering, Imperial College London
London, UK
Editorial Member
Debdulal Das
Department of Metallurgy and Materials Engineering, Indian Institute of Engineering Science and Technology, Shibpur
Howrah, West Bengal, India
Editorial Member
Denisse Ortiz-Acosta
Weapon Systems Engineering, Los Alamos National Laboratory
Los Alamos, New Mexico, USA
Editorial Member
Devesh Dadhich Shreeram
Micron Technology Inc.
Boise, Idaho, USA
Editorial Member
Dingxin Liu
Sun Yat-sen University
Guangzhou, Guangdong, China
Editorial Member
Divyaraj Desai
Palo Alto Research Center
Palo Alto, California, USA
Editorial Member
Dunlu Sun
Crystal Materials Lab, Anhui Institute of Optics and Fine Mechanics, Chinese Academy of Sciences
Hefei, Anhui, China
Editorial Member
Elnaz Esmizadeh
Polymer Science and Engineering, University of Bonab
Bonab, East Azerbayjan, Iran
Editorial Member
Evgeniya Kovalska
Engineering department, University of Exeter
Exeter, Devon, UK
Editorial Member
Fellah Mamoun
Mechanical enginneering department, Abbes Laghrour University
Khenchela, Algeria
Editorial Member
Fethi Dagdelen
Department of Physics, Firat University
Elazig, Turkey
Editorial Member
Fida Rehman
Department of Physics, Abbottabad University of Science and Technology
Abbottabad, Khyber Pakhtoonkhwa, Pakistan
Editorial Member
Francesco Colangelo
Department of Engineering, University of Naples Parthenope
Naples, Italy
Editorial Member
Ganesh Kuamar
Department of Mathematics, Kuvempu University
Shivmogga, Karnataka, India
Editorial Member
Gang Jian
School of Materials and Engineering, Jiangsu University of Science and Technology
Zhenjiang, Jiangsu, China
Editorial Member
Gang Wang
Department of Chemistry, Northwestern University
Evanston, Illinois, USA
Editorial Member
Geetha Vishnu
Department of Physics, Government Victoria College
Palakkad, Kerala, India
Editorial Member
Hai Zhong
Department of Physics, University of Hamburg
Hamburg, Germany
Editorial Member
Haiyan Li
School of Chemistry and Chemical Engineering, Henan University
Kaifeng, Henan Province, China
Editorial Member
Hamda Al-Thani
National Energy and Water Research Center
Abu Dhabi, United Arab Emirates
Editorial Member
Department of Materials Engineering, Isfahan University of Technology
Isfahan, Iran
Editorial Member
Han Jin
Faculty of Information Engineering and Science, Ningbo University
Ningbo, Zhejiang, China
Editorial Member
Hassan Juwhari
Department of Physics, University of Jordan
Amman, Jordan
Editorial Member
Hetuo Chen
Shanghai Institute of Ceramics, Chinese Academic of Sciences
Shanghai, China
Editorial Member
Hongqi Yang
School of Naval Architecture, Dalian University of Technology
Dalian, Liaoning, China
Editorial Member
Hossein Sojoudi
Department of Mechanical Engineering, University of Toledo
Toledo, Ohio, USA
Editorial Member
Houzheng Wu
Department of Materials, Loughborough University
Loughborough, Leicestershire, UK
Editorial Member
Institute of Optoelectronic Technology, Lishui University
Lishui, Zhejiang, China
Editorial Member
Hui Mao
Pharmaceutical and Material Engineering School, Jinhua Polytechnic
Jinhua, Zhejiang, China
Editorial Member
Hüseyin Arslan
Department of Physics, Kahramanmaraş Sütçüimam University
Kahramanmaraş, Turkey
Editorial Member
Hyungkyu Han
Theoretical Division, Center for Integrated Nanotechnologies, Los Alamos National Laboratory
Los Alamos, New Mexico, USA
Editorial Member
Indrajit Naik
Department of Physics, North Orissa University
Baripada, Odisha, India
Editorial Member
Irem Sanal
Department of Civil Engineering, Bahcesehir University
Istanbul, Turkey
Editorial Member
Ishaq Musa
Department of Physics, Palestine Technical University-Khaddori
Tulkarm, Palestinian Territories
Editorial Member
Jaime Andrés Perez Taborda
Department of Electrical and Electronics Engineering, Universidad de Los Andes
Bogotá, Colombia
Editorial Member
Jatinder Garg
Department of Mechanical Engineering, Baba Hira Singh Bhattal Institutes of Engineering and Technology
Sangrur, Punjab, India
Editorial Member
Jayanta Maity
Department of Chemistry, Sidho Kanho Birsha University
Asansol, West Bengal, India
Editorial Member
Jaydevsinh Gohil
Laboratory for Advanced Research in Polymeric Materials, Central Institute of Plastics Engineering and Technology
Bhubaneswar, Odisha, India
Editorial Member
Jian Xu
Division of Electrical and Computer Engineering, Louisiana State University
Baton Rouge, Louisiana, USA
Editorial Member
Jianxiong Zhu
Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology
Daejeon, South Korea
Editorial Member
Jianying Ouyang
National Research Council Canada
Ottawa, Ontario, Canada
Editorial Member
Jing Peng
Department of Chemical and Biomolecular Engineering, University of Tennessee
Knoxville, Tennessee, USA
Editorial Member
School of Materials Science and Engineering, Yancheng Institute of Technology
Yancheng, Jiangsu, China
Editorial Member
Jinyue Dai
Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences
Ningbo, Zhejiang, China
Editorial Member
Department of Nanoscience and Technology, Bharathiar University
Coimbatore, Tamil Nadu, India
Editorial Member
Jose Aguiar
Department of Civil Engineering, University of Minho
Guimaraes, Minho, Portugal
Editorial Member
Jun Wang
State Key Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences
Beijing, China
Editorial Member
Jun Song Chen
School of Materials and Energy, University of Electronic Science and Technology of China
Chengdu, Sichuan, China
Editorial Member
Junshi Zhang
Department of Mechanical Engineering, City University of Hong Kong
Hong Kong, China
Editorial Member
Junyou Yang
School of Materials Science and Engineering, Huazhong University of Science and Technology
Wuhan, Hubei, China
Editorial Member
Kazem Reza Kashyzadeh
Young Researchers and Elite Club, Semnan Branch, Islamic Azad University
Tehran, Iran
Editorial Member
Electrical and Computer Engineering, University of Illinois at Urbana Champaign
Urbana, Illinois, USA
Editorial Member
Kun Li
Department of Metallurgical, Materials and Biomedical Engineering, University of Texas at El Paso
El Paso, Texas, USA
Editorial Member
Lapyote Prasittisopin
Faculty of Engineering and Technology, Pathumthani University
Pathumthani, Thailand
Editorial Member
Liujiang Zhou
Los Alamos National Laboratory
Los Alamos, New Mexico, USA
Editorial Member
Material Research Center, Institute of Modern Physics, Chinese Academy of Sciences
Lanzhou, Gansu, China
Editorial Member
Maedeh Amirpour
Department of Mechanical Engineering, the University of Auckland
Auckland, New Zealand
Editorial Member
Maedeh Amirpour
Department of mechanical engineering, The University of Auckland
Auckland, New Zealand
Editorial Member
Mahamuda Shaik
Department of Physics, Koneru Lakshmaiah Education Foundation
Vaddeswaram, Andhra Pradesh, India
Editorial Member
Manikandan Vairavan
Department of Mechanical Engineering, Kalasalingam University
Tamil Nadu, India
Editorial Member
Manikandan Vairavan
Department of Mechanical Engineering, Kalasalingam University
Tamil Nadu, India
Editorial Member
Manoj Gupta
Department of Mechanical Engineering/ Motilal Nehru National Institute of Technology
Allahabad, Utter Pradesh, India
Editorial Member
Marc Jeroense
MJ MarCable Consulting AB
Karlskrona, Blekinge, Sweden
Editorial Member
Marco Ludovico-Marques
Barreiro School of Technology, Polytechnic Institute of Setúbal
Barreiro, Setúbal, Portugal
Editorial Member
Maros Halama
Institute of Materials, Centre Promatech, Technical University of Kosice
Kosice, Slovakia
Editorial Member
Maryam Shakiba
Department of Electrical Engineering, Jundi Shapur University of Technology
Dezful, Khuzestan, Iran
Editorial Member
Mehran Riazian
‎Department of Engineering, Tonekabon Branch, Islamic Azad University‎
Tonekabon, Mazandaran, Iran
Editorial Member
Department of Design and Technology of Radioequipment, Novgorod State University
Veliky Novgorod, Novgorod Oblast, Russia
Editorial Member
Mohamadtaqi Baqersad
Civil Engineering Department, Florida International University
Miami, Florida, USA
Editorial Member
Mohammad Asadikiya
Department of Mechanical and Materials Engineering, Florida International University
Miami, USA
Editorial Member
Mohammad Mahdavian
Surface Coatings and Corrosion Department, Institute for Color Science and Technology
Tehran, Iran
Editorial Member
Mohd Abdul Khan
King Abdullah Institute for Nanotechnology, King Saud University
Riyadh, Saudi Arabia
Editorial Member
Department of Material, Iran University of Industries and Mines
Tehran, Iran
Editorial Member
Mohsen Karimi
Department of Materials Science and Engineering, Shahrood University of Technology
Shahrood, Semnan, Iran
Editorial Member
Muhammad Faiq Abdullah
School of Bioprocess Engineering, Universiti Malaysia Perlis
Arau, Perlis, Malaysia
Editorial Member
Muhammad Waqas Iqbal
Department of Physics, Riphah International University
Lahore, Punjab, Pakistan
Editorial Member
Najam Ul Hassan
School of Material Science and Engineering, Nanjing University of Science and Technology
Nanjing, Jiangsu, China
Editorial Member
Navid Mozaffari
Bentley Systems, Incorporated
Metairie, Louisiana, USA
Editorial Member
Neelam Srivastava
Department of Physics, Banaras Hindu University
Varanasi, Uttar Pradesh, India
Editorial Member
Nur Zalikha Khalil
Faculty of Mechanical Engineering, Universiti Malaysia Pahang
Pekan, Pahang, Malaysia
Editorial Member
Oluwaseun John Dada
NanoStructures, Composite and Energy Research lab, Perfect Right (Oovao Powers) Ltd.
Tuen Mun, Hong Kong
Editorial Member
Pan Gong
School of Materials Science and Engineering, Huazhong University of Science and Technology
Wuhan, Hubei, China
Editorial Member
Department of Civil Engineering, Krishnasamy College of Engineering and Technology.
Cuddalore, Tamilnadu, India
Editorial Member
Partha Dutta
Electrical, Computer and Systems Engineering Department, Rensselaer Polytechnic Institute
Troy, New York, USA
Editorial Member
Partha Barman
Department of Physics and Materials Science, Jaypee University of Information Technology
Solan, Himachal Pradesh, India
Editorial Member
Patricia Farias
Department of Biophysics, Federal University of Pernambuco
Recife, Pernambuco, Brazil
Editorial Member
Prahlad Kumar Routh
Department of Physics, Columbia University
New York, USA
Editorial Member
Department of Manufacturing and Civil Engineering, Norwegian University of Science and Technology
Gjovik, Oppland, Norway
Editorial Member
Praveena Rajendra
School of Engineering, KDU University College
Shah Alam, Selangor, Malaysia
Editorial Member
Qiao Yanxin
School of Materials Science and Engineering, Jiangsu University of Science and Technology
Zhenjiang, Jiangsu, China
Editorial Member
Qibo Zhang
Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology
Kunming, Yunnan, China
Editorial Member
Qing Rong Peng
Department of Chemistry, China Agricultural University
Beijing, China
Editorial Member
Rabie Benioub
Department of Science and Technology, Hirosaki University
Aomori, Japan
Editorial Member
Rajasekaran Rajamanickam Pillai
Department of Physics, Thiruvalluvar University
Tiruvannamalai, Tamil Nadu, India
Editorial Member
Rajesh Jha
Department of Mechanical Engineering, Colorado School of Mines
Golden, Colorado, USA
Editorial Member
Rajwali Khan
Department of Physics, Abdul Wali Khan University
Mardan, Pakistan
Editorial Member
Rakan Alturk
Department of Automotive Engineering, Clemson University
Greenville, South Carolina, USA
Editorial Member
Roman Fediuk
Department of Hydraulic Engineering, Theory of Buildings and Structures, Far Eastern Federal University
Vladivostok, Primorsky Krai, Russia
Editorial Member
Rui Feng
School of Materials and Engineering, Shandong University of Technology
Zibo, Shandong, China
Editorial Member
Sadegh Mehdi Aghaei
Department of Electrical Engineering, Florida International University
Miami, Florida, USA
Editorial Member
Samuel Tulashie
Industrial Chemistry Section, Department of Chemistry, University of Cape Coast
Cape Coast, Central Region, Ghana
Editorial Member
Santanu Das
Department of Ceramic Engineering, Indian Institute of Technology (BHU)
Varanasi, Uttar Pradesh, India
Editorial Member
Santiranjan Shannigrahi
Structural Materials Department, Institute of Materials Research and Engineering
Singapore
Editorial Member
Saravanakumar Subramanian
Department of Physics, Kalasalingam University
Virudhunagar, Tamil Nadu, India
Editorial Member
Sayavur Bakhtiyarov
Mechanical Engineering Department, New Mexico Institute of Mining and Technology
Socorro, New Mexico, USA
Editorial Member
Selcuk Hazar
Department of Solid Mechanics, KTH Royal Institute of Technology
Stockholm, Sweden
Editorial Member
Seniye Karakaya
Department of Physics, Eskisehir Osmangazi University
Eskisehir, Turkey
Editorial Member
Sethuramachandran Thanikaikarasan
Department of Physics, Saveetha School of Engineering
Chennai, Tamil Nadu, India
Editorial Member
Shao-Liang Cheng
Department of Chemical and Materials Engineering, National Central University
Taoyuan, Taiwan
Editorial Member
Shuling Gao
School of Civil and Transportation, Hebei University of Technology
Tianjin, China
Editorial Member
Shuye Zhang
State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology
Harbin, Heilongjiang, China
Editorial Member
Shweta Chaure
Department of Physics, College of Engineering,Coep
Pune, Maharashtra, India
Editorial Member
Sorour Sadeghzade
Department of Materials, Isfahan University of Technology
Isfahan, Iran
Editorial Member
Soumen Dhara
School of Physics and Astronomy, Cardiff University
Cardiff, Wales, UK
Editorial Member
Soumen Kar
Mechanical Engineering Department, University of Houston
Houston, Texas, USA
Editorial Member
Srinivasa V Chikkol
Department of Mechanical Engineering, Gowdara Mallikarjunappa Institute of Technology
Davanagere, Karnataka, India
Editorial Member
Sudhir Ravula
Department of Chemistry, Louisiana State University
Baton Rouge, Louisiana, USA
Editorial Member
Sujith Kalluri
Department of Energy Engineering, Ulsan National Institute of Science and Technology
Ulsan, South Korea
Editorial Member
Suryanarayanan Vembu
Electroorganic Division, Central Electrochemical Research Institute
Karaikudi, Tamil Nadu, India
Editorial Member
Svprabhakar Vattikuti
School of Mechanical Engineering, Yeungnam University
Gyeongsan, Daegu, South Korea
Editorial Member
Syed Mustansar Abbas
Department of Energy and Materials Engineering, Dongguk University
Seoul, South Korea
Editorial Member
Syed Shoaib Ahmad Shah
School of Chemistry and Chemical Engineering, Chongqing University
Chongqing, China
Editorial Member
Tetiana Prikhna
Institute for Superhard Materials, National Academy of Sciences of Ukraine
Kiev, Ukraine
Editorial Member
Thotakura Ramesh
Department of Physics, Bvrit Hyderabad College of Engineering for Women
Hyderabad, Telangana, India
Editorial Member
Tianhao Ji
Science College, Beijing University of Technology and Business
Beijing, China
Editorial Member
Ulku Bayhan
Department of Physics, Mehmet Akif Ersoy University
Merkez, Burdur, Turkey
Editorial Member
Department of Chemical, Materials and Production Engineering, University of Napoli Federico II
Napoli, Italy
Editorial Member
Venkata Chada
Asian Paints Limited
Mumbai, Maharashtra, India
Editorial Member
Victor Champagne
ARL Cold Spray Center, US Army Research Laboratory
Worcester, Massachusetts, USA
Editorial Member
Victoria Piunova
Research Staff Member, IBM Almaden Research Center
San Jose, USA
Editorial Member
Viktorija Mecnika
Institute of Design Technologies, Riga Technical University
Ulm, Baden-Wuertemberg, Germany
Editorial Member
Vinod Dhanak
Department of Physics, University of Liverpool
Liverpool, UK
Editorial Member
Department of Electrochemistry, Madrid Institute for Advanced Studies
Getafe, Madrid, Spain
Editorial Member
Wenbo Ding
School of Materials Science and Engineering, Georgia Institute of Technology
Atlanta, Georgia, USA
Editorial Member
Xiaoting Zhang
Graphene and Energy Storage R&D Centre, China Energine International (Holdings) Limited
Beijing, China
Editorial Member
Xingtao Xu
College of Hydrology and Water Resources, Hohai University
Nanjing, Jiangsu, China
Editorial Member
Xingyan Yao
Chongqing Engineering Laboratory for Detection Control and Integrated System, Chongqing Technology and Business University
Chongqing, China
Editorial Member
Yan Huang
Brunel Centre for Advanced Solidification Technology, Institute of Materials and Manufacturing, Brunel University London
Uxbridge, Middlesex, UK
Editorial Member
Yanfei Cao
Institute of Metal Research, Chinese Academy of Sciences
Shenyang, Liaoning, China
Editorial Member
Yizheng Cao
Albany Molecular Research Incorporated
West Lafayette, USA
Editorial Member
Younes El Kacimi
Department of Chemistry, Ibn Tofail University
Kénitra, Morocco
Editorial Member
Young Hoon Rim
College of Liberal Arts, Semyung University
Chechon, Choongbuk, South Korea
Editorial Member
Yuanfei Han
School of Materials Science and Engineering, Shanghai Jiao Tong University
Shanghai, China
Editorial Member
Zehraa Najim
Physics Department, College of Science, Baghdad University
Baghdad, Iraq
Editorial Member
Zhong Hui Li
Institute of Functional Molecules, Chengdu Normal University
Chengdu, Sichuan, China
Browse journals by subject