Advances in Materials

Volume 7, Issue 3, September 2018

  • The Influence of Metal Surfaces on the Effect of Lubricants

    Jürgen Rigo, Pavel Kovačócy, Joachim Schulz, Katja Vlasov

    Issue: Volume 7, Issue 3, September 2018
    Pages: 58-66
    Received: 12 June 2018
    Accepted: 6 July 2018
    Published: 13 August 2018
    Downloads:
    Views:
    Abstract: An important aspect of tribology and lubrication is the question of the relationships and the predictability of phenomena of the interaction of lubricants with metal surfaces. In recent years studies on interactions of antiwear additives and sulfur carriers have been presented. Significant differences in the interaction with different metal surface... Show More
  • Experimental and FEM Simulation Analysis of Lateral Extrusion Process on Bimetal Cross Fitting

    Le Thai Hung, Do Quang Long, Le Trung Kien, Vu Xuan Hung, Pham Quang

    Issue: Volume 7, Issue 3, September 2018
    Pages: 67-72
    Received: 17 June 2018
    Accepted: 9 July 2018
    Published: 15 August 2018
    Downloads:
    Views:
    Abstract: The purpose of this paper is to study combines the finite element method model and experimental on bimetal cross fitting by lateral extrusion process. Fabricating bimetallic cross fitting by lateral extrusion technique remains some difficulties like taking the product out of the die hardly, harming the die longevity since the high compressive force... Show More
  • Fabrication of Tin Oxide Thin Film Transistors by RF Magnetron Sputtering Using Sn/SnO Composite Target

    Cheol Kim, Sarah Eunkyung Kim

    Issue: Volume 7, Issue 3, September 2018
    Pages: 73-77
    Received: 12 July 2018
    Accepted: 24 July 2018
    Published: 17 August 2018
    Downloads:
    Views:
    Abstract: P-type tin oxide thin film deposited by RF sputtering for transparent thin film transistor (TFT) applications is the subject of this study. P-type tin oxide thin film can be made by doping a cation with a lower valence into n-type SnO2 as an acceptor impurity or by fabrication with tin monoxide (SnO). The later method was investigated in this study... Show More
  • Mechanical Properties of Hybrid Composites with Date Palm Fibre Reinforcement

    Subramanya Raghavendra, Nantha Muthu Sivaram, Tabassum Sadik, Shimoga Sathyanarayana Prabhakara

    Issue: Volume 7, Issue 3, September 2018
    Pages: 78-81
    Received: 23 July 2018
    Accepted: 7 August 2018
    Published: 4 September 2018
    Downloads:
    Views:
    Abstract: Plant-based fibres are commonly used as reinforcements in polymer composites for applications such as packaging, construction, automotive, and decorative household items. This process will reduce the cost of production along with eliminating solid wastes. Here, composite materials were prepared using epoxy resin as the matrix and date palm fibres, ... Show More
  • Compound Design for Continuously Cast Concrete to Underlie an Extensive Ice Layer in the 13th National Winter Games Venues

    Liu Jun, Zhang Ping, Wang Qin, Li Kai, Chen Xu, Bai Guoqiang

    Issue: Volume 7, Issue 3, September 2018
    Pages: 82-88
    Received: 5 July 2018
    Accepted: 21 August 2018
    Published: 26 September 2018
    Downloads:
    Views:
    Abstract: This paper details the design process and testing procedure used to create frost-resistant concrete for this engineering project, which involved considering properties such as tendency to shrinkage and durability. Through the examination of performance indices, it is shown that the designed concrete mix met the requirements of the design and of con... Show More